![]() ![]() This software can let you operate as if you have unlimited USB ports or you could plug a gamepad into a laptop but tunnel it to the PC making it almost wireless. You can also isolate devices locking them to one user at a time. This solves cross-platform compatibility issues and allows easy sharing for example letting any office PC use a printer connected to a certain machine. No matter how far away you are you can interact with a device plugged into another machine as if it were right there. USB Network Gate essentially connects a USB device to your machine over the internet LAN or WLAN. This kind of problem solving makes a program really worthwhile especially with a free trial. USB Network Gate allows you to tell your PC or laptop that a USB device plugged in elsewhere is actually plugged in to that machine using the internet. Have you ever left a USB device in your home machine and needed it at work? Maybe you?ve got a certain device you want to use but you?re out of free ports? There?s a way around both problems. Note: the OTG cable & U disk keep in connecting until the screen displays “Update success”.USB Network Gate adds a New Kind of Connectivity If the product do not have the entity VOLUME key, just press the POWER key for more than five times when power on, then choose the “ Update mode > Memory card/OTG update mode” to start the upgrade. Step 5: Power off the phone, insert the OTG cable & U disk, andįor EMUI 12.x, press the VOLUME UP key and the POWER key at the same time, then it will enter recovery interface, and then choose the “ Update mode > Memory card/OTG update mode” to start the upgrade. Step 4: Check that the directory and files are intact in the U disk root directory. Copy the dload document to the root directory in the U disk. Step 3: Check that the directory of all files is intact in dload. ![]() Step 2 (optional): Format the U disk to ensure the capacity is sufficient. A Sandisk, Kingston, or Kingmax U disk is recommended. Step 1: Prepare a U disk with a capacity of at least 8 GB. Note: the SD card keep in connecting until the screen displays “Update success”.įor EMUI operating system, shows as below: After the progress icon is fully loaded, the phone will restart automatically, and the upgrade is completed. Step 6: During the upgrade, a progress icon will be displayed. ![]() If the product do not have the entity VOLUME key, just press the POWER key for more than five times when power on, then choose the “ Update mode > Memory card/OTG update mode” to start the upgrade. Step 5: Power off the phone, insert the microSD card, andįor EMUI 12.x,press the VOLUME UP key and the POWER key at the same time, then it will enter recovery interface, and then choose the “ Update mode > Memory card/OTG update mode” to start the upgrade. Step 4: Check that the directory and files are intact in the SD card root directory. Copy the dload document to the root directory in the microSD card. Step 2 (optional): Format the SD card to ensure the capacity is sufficient. A Sandisk, Kingston, or Kingmax SD card is recommended. Step 1: Prepare a SD card with a capacity of at least 8 GB. How to update firmware Huawei & Honor device ? Version-1: SD card Forcible Upgrade ![]()
0 Comments
Leave a Reply. |